Make your car or boat shine like new again
Thanks to the VONROC 3 step polish disc system, your car, boat or engine will shine like never before! These polishing pads allow you to remove scratches and buff out rusty patches wherever you want to apply wax.
The yellow polishing pads are suitable for removing shallow imperfections in the paint and creating optimal shine. You can use them for the second step of the 3 step plan in the polishing process.
Good quality polishing discs with rounded corners, equipped with hook and loop fasteners for easy attachment.
Suitable for almost all brands of 125mm (dual action) polishing machines
The polishing discs are suitable for almost all brands of dual action polishing machines with a support disc of 125mm which is equipped with hook and loop.
For which applications are the polishing discs suitable?
- Yellow (step 2): for removing shallow imperfections in the paint and creating optimal shine.
Good to know
Are you looking for polishing discs which are suitable for removing scratches? Or perhaps polishing discs that are suitable to apply polishes, wax and sealants or to create shine? If so, take a look at these polishing discs:
- PM809AA: 3 pieces of polishing discs red. For removing scratches and imperfections in the paint.
- PM811AA: 3 pieces polishing discs black. For applying polishes, wax and sealants and for creating shine.
In addition, it is also possible to purchase a complete starter set with polishing discs. Take a look at our (PM816AA). This starter set contains 3 pieces of polishing discs: 1 red, 1 yellow and 1 black. By purchasing this set you’ll have all the necessary polishing discs at your disposal.
Tips for usage
We always recommend testing polishing discs on a "test spot". Each new surface should be tested, as all painted surfaces are different. Start with a fine polishing disc and use a delicate polish. Make sure to follow the instructions of the manufacturer of said polish. If you are satisfied with the test result, you can start polishing the entire panel. Do not use too much polish to avoid saturation of the polishing discs, reducing their capacity to remove the imperfections in the paint. For best results, we recommend that you have multiple pieces of each disc at hand. Once the polishing disc is fully saturated it should be replaced. Else, the disc will be completely soaked (full of polish) and will not be able to remove imperfections. Also, the disc will lose its ability to release heat and detach from the hook & loop. However, they are easy to clean after use by washing them in soapy warm water. After you let them dry they will ready for use again.
Specifications of the polishing discs
Polishing disc yellow
- Polishing step: 2
- Diameter: 125mm
- Thickness: 30mm
- Colour: yellow
- Application: for removing shallow imperfections and creating optimal shine
- Material: foam
- Hook & loop: yes
- Rounded corners: yes
- Porosity: 65-75 PPI
- Density: 27-33Kg/m3
- Elasticity: ≥300Kpa
What's inside the eco-friendly packaging?
- 3 x Polishing disc / polishing sponge / polishing disc 125mm yellow