Make your car or boat shine like new again

Thanks to the VONROC 3 step polish disc system, your car, boat or motor will shine like never before! These polishing pads allow you to remove scratches and buff out rusty patches wherever you want to apply wax.

The red polishing pad in this set is suitable for removing scratches and imperfections in the paint. The yellow polishing pad is suitable for removing shallow imperfections in the paint and creating an optimal shine. The black pad is for applying polishes, wax and sealants and for creating shine. You can either use the pad for the last step of the polishing process, but it’s also suitable for the application of wax.

Good quality polishing discs with rounded corners, equipped with hook and loop fasteners for easy attachment.

Suitable for almost all brands of 150mm (dual action) polishers

The polishing discs are suitable for almost all brands of dual action polishing machines with a support disc of 150mm equipped with hook and loop attachment.

Suitable for the VONROC (PM501AC, S_PM501AC and S2_PM501AC) Dual action polisher 1050W – 150mm

For which applications are the polishing discs suitable?

  • Red (step 1): for removing scratches and removing imperfections in the paint.
  • Yellow (step 2): for buffing out shallow imperfections in the paint and creating an optimal shine.
  • Black (step 3): for applying polishes, wax and sealants and for creating shine.

Tips for usage

The set consists of a red, a yellow and a black disc. Depending on the required application, you always have the right disc at hand with these three polishing discs.

To determine which VONROC polishing pad you need, we recommend testing it on a "test spot". Each new panel should be tested, as all painted surfaces are different. Start with a fine polishing disc and use a delicate polish. Make sure to follow the instructions of the manufacturer of said polish. If you are satisfied with the test result, you can start polishing the entire panel. Do not use too much polish to avoid saturation of the polishing discs, reducing their capacity to remove the imperfections in the paint. For best results, we recommend that you have multiple pieces of each disc at hand. Once the polishing disc is fully saturated it should be replaced. Else, the disc will be completely soaked (full of polish) and will not be able to remove imperfections. Also, the disc will lose its ability to release heat and detach from the hook & loop. However, they are easy to clean after use by washing them in soapy warm water. After you let them dry they will ready for use again.

Specifications of the polishing discs

  • Polishing disc red
    - Polishing step: 1
    - Diameter: 150mm
    - Thickness: 30mm
    - Colour: red
    - Application: for removing scratches and imperfections in the paint
    - Material: foam
    - Hook & loop: yes
    - Rounded corners: yes
    - Porosity: 60-70 PPI
    - Density: 29-35Kg/m3
    - Elasticity: ≥340Kpa

  • Polishing disc yellow
    - Polishing step: 2
    - Diameter: 150mm
    - Thickness: 30mm
    - Colour: yellow
    - Application: for removing shallow imperfections and creating optimal shine
    - Material: foam
    - Hook & loop: yes
    - Rounded corners: yes
    - Porosity: 65-75 PPI
    - Density: 27-33Kg/m3
    - Elasticity: ≥300Kpa

  • Polishing disc black
    - Polishing step: 3
    - Diameter: 150mm
    - Thickness: 30mm
    - Colour: Black
    - Application: for applying wax and creating shine
    - Material: foam
    - Hook & loop: yes
    - Rounded corners: yes
    - Porosity: 75-90 PPI
    - Density: 27-33Kg/m3
    - Elasticity: ≥250Kpa

What’s in the eco-friendly packaging?

  • 1 x Polishing disc / polishing sponge / polishing disc 150mm red
  • 1 x Polishing disc / polishing sponge / polishing disc 150mm yellow
  • 1 x Polishing disc / polishing sponge / polishing disc 150mm black
More Information
EAN Code8717479097814
SKUPM815AA
© VONROC 2022